Common Causes of Problems with Water Irrigation Pumps

Common Causes of Problems with Water Irrigation Pumps

May 23, 2019

Irrigation pumps are a serious investment for homeowners and business owners alike. The last thing you want to have to do is replace one due to the expense and hassle. That’s why it’s a smart practice to regularly inspect equipment and ensure that it’s in top working order. When you see a problem, then you need to call a technician to have it handled immediately.

Maintaining an irrigation well pump in Briscoe County, TX is a smart practice so that you can reap the reward on your investment. Read on to find out how to spot problems right away:

  • Shut valves: When one of the valves doesn’t open during a normal run cycle, captured water is spun in the pump case by the impeller. As the water isn’t moving, this results in friction heating the water to the point that it could cause damage to the pipework. The pipes then expand and become increasingly weaker, which could lead to breakage or failure. Valves that don’t open are a serious cause for concern.
  • Insufficient pressure: This is typically the result of a clogged or damaged supply line. It’s possible the water source has changed and can no longer adequately supply the pump. The low pressure is liable to damage the impeller and other parts. This problem is often accompanied by a noise, almost like the pump is stuffed with rocks. Any time you hear this noise or otherwise suspect low pressure, it’s time to bring in the professionals.
  • Dirty water: Water contamination is possible in a number of ways. Larger particles are likely to clog the intake, whereas smaller particles like sand will be difficult to filter out completely. The smaller particles entering the system threaten the pump and valves and may significantly shorten their lifespan. This also may mean chemicals and PH issues can follow, doing additional damage to the pump seals.
  • Over-amperage: When the voltage entering the pump isn’t at the right level, then the motor is likely to overheat. For those motors under 2 horsepower, they have a shutdown protection to prevent this from happening, but those higher than 2 horsepower don’t have this requirement. This electrical supply problem can lead to costly repairs.

The bottom line is that when you see an issue, you should call for professional irrigation pump repair in Briscoe County, TX. Four Seasons Irrigation specializes in center pivot irrigation systems and bringing widespread, highly economical irrigation solutions to agricultural operations throughout our service area. Our team of experts will handle everything from the sale and customization of your system to the complete installation and repair of it moving forward.

Four Seasons Irrigation has the depth of experience to tackle any job. We can perform hydraulic, mechanical and electrical repair services to irrigation pumps, as well as excavate for drainage ditches and even repair water line and wire systems. Our goal is to keep the water flowing for our customers, so your crops stay properly irrigated at all times. Give us a call today for more information and to get a free estimate!

Categorised in: